4 items in the extended setup menu – Sony HDW-M2000 User Manual

Page 124

Advertising
background image

Chapter 9

Setup Menus

9-28

Chapter 9 Setup Menus

9-4 Items in the Extended Setup Menu

Menu items in the range 900 to 999, relating to digital processing (continued)

Item number Item name

Settings

934

CROSS COLOR (DC)

Carry out the down-converter cross color adjustment.
0 to 8 to 15

935

DETAIL GAIN (DC)

Carry out the down-converter image enhancer adjustment. Adjust the sharpness
of edge emphasis.
0 to 20H to 7FH

936

LIMITER (DC)

Carry out the down-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH

937

CRISP THRESHOLD (DC) Carry out the down-converter image enhancer adjustment. Set the threshold

amplitude at which low amplitude signals are not emphasized.
0 to FH

938

LEVEL DEPEND
THRESHOLD (DC)

Carry out the down-converter image enhancer adjustment. Set the luminance
range for edge enhancement.
0 to 8 to FH

939

H DETAIL FREQUENCY
(DC)

Carry out the down-converter image enhancer adjustment. Set the central
frequency for edge enhancement.
2.6MHz to 3.4MHz to 3.9MHz to 4.6MHz

940

H/V RATIO (DC)

Carry out the down-converter image enhancer adjustment. Set the horizontal/
vertical ratio for edge enhancement.
0 to 3 to 7

941

GAMMA LEVEL (DC)

Carry out the down-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H

918

SLOW PROCESS MODE

Switch the filter for increasing the vertical resolution during slow-motion playback
on or off.
ON: Increase the vertical resolution in slow-motion playback.
OFF : Do not increase the vertical resolution in slow-motion playback.

Note

In 59.94 Hz mode, this item is only valid when menu item 018 is set to OFF
TAPE.
In 50 Hz mode, this item is always valid.

930

CONVERTER MODE (DC) Select the down-converter mode.

EDGE-CROP : Select the edge-crop mode.
LETTER BOX: Select the letter box mode.
SQUEEZE: Select the squeeze mode.

931

LETTER BOX MODE (DC) Select the aspect ratio of the down-converter output when menu item 930 is set to

LETTER BOX.
16:9 : Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.

932

H CROP POSITION (DC)

Adjust the “H-crop” (the horizontal position when cropping in the edge crop mode)
of the up/down converter output when menu item 930 is set to EDGE-CROP.
–120 to 0 to 120

(Continued)

Advertising
This manual is related to the following products: