Soleus Air FC1-42R-03 - Manual (Page 4)

4
ASSEMBLY
1. First, put the pillar together. The pillar is made of two separate halves. Make sure
to pass the power cord through the middle of the pillar before snapping the pillar
pieces together.
2. Now, attach the pillar to the fan body using the included pillar screws.
3. Next, put the fan base together. Like the pillar, the fan base is made up of two
separate halves. Make sure to pass the power cord through the middle of the fan
base prior to sliding the base pieces together. There is a groove on the bottom of
the fan base for the power cord. Make sure this groove is aligned with the back of
the fan prior to attaching the fan base to the pillar.
4. Once the groove on the bottom of the fan is aligned, attach the fan base using
the included base screws. Last, pass the cord through the groove on the fan
base.