Sony DVP-NC675P - Manual (Page 67)

C:\Documents and
Settings\PC3\Desktop\My
Document\3091202111 DVP-
NC675P\SOURCE\DVP- master page=right
DVP-NC675P
3-091-202-11(1)
67
Set
ting
s an
d Adj
u
st
m
ent
s
When NORMAL/PROGRESSIVE
switch is set to PROGRESSIVE
You can fine-tune the Progressive (480p)
video signal output when you set NORMAL/
PROGRESSIVE switch to PROGRESSIVE
(the PROGRESSIVE indicator lights up) and
connect the player using the COMPONENT
VIDEO OUT jacks to a TV that is able to
accept the video signal in progressive format.
◆ MODE (PROGRESSIVE)
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV, such as dramas and sit-coms, and
displays images at 30 frames/60 fields per
second. Film based software is derived from
film and displays images at 24 frames per
second. Some DVD software contains both
Video and Film.
In order for these images to appear natural on
your screen when output in PROGRESSIVE
mode (60 frames per second), the progressive
video signal needs to be converted to match
the type of DVD software that you are
watching.
Note
Using the LINE OUT (VIDEO) jack or the S
VIDEO OUT jack will cause the picture to
become unclear or go blank when you set
NORMAL/PROGRESSIVE switch to
PROGRESSIVE. In this case, set NORMAL/
PROGRESSIVE switch to NORMAL so that
the PROGRESSIVE indicator turns off.
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
Select “CUSTOM SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 64).
The default settings are underlined.
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
◆ PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
OFF Sets the black level of the output
signal to the standard level.
ON Raise the standard black level.
Use this when the picture
becomes too black.
AUTO This will automatically detect
if you are playing Film based
or Video based software and
convert the signal to the
appropriate conversion mode.
Normally select this position.
VIDEO This will set the conversion
mode for Video based
software, regardless of the
type of software that you are
playing.
OFF Switches this function off.
ON The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF Switches this function off.
ON Automatically starts playback
when the player is turned on.
BRIGHT Makes the lighting bright.
DARK Makes the lighting dark.
AUTO The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER: OFF
OFF
BRIGHT
AUTO PAUSE MODE:
OFF TRACK SELECTION:
ON MULTI-DISC RESUME:
, continued