Samsung SF-360 Series - Manual (Page 36)

A
DVA
N
CED
F
AX
5.5
A
DVA
N
CED
F
AX
A
D
VAN
CED
F
AX
A
D
VANC
E
D
F
AX
A
D
VANC
E
D
F
AX
A
DV
ANCE
D
F
AX
A
DV
ANCE
D
F
AX
A
D
VAN
CED
F
AX
Forwarding a fax or message
Fax forwarding
While you are away from your home or office, you do not have to miss important faxes. Your machine can
forward any faxes it receives to a fax machine at your new location, and it can print a copy for you to review
when you get back as well.
1 Press Menu repeatedly, and press OK when ADVANCED FAX appears.
2 Select Set Fax Forward by pressing Scroll buttons, and press OK .
The display shows Off , Forward or Forward & Print whenever you press Scroll buttons.
• Off: disables fax forwarding
• Forward: forwards a fax to your new location
• Forward & Print: forwards a fax and prints it to your new location
3 Press OK after selecting Forward or Forward & Print .
4 Enter the fax number and press OK .
5 Enter the start time and press OK .
6 Enter the end time and press OK
• The machine returns to Standby Mode and FWD will appear in the display at Fax Forward start time and every fax
will be forwarded to your new location till the end time.
• During forwarding time, the receive mode temporarily changes to:
Message forwarding (SF-365TP only)
When you’re out of the office or home and you want to be notified whenever there’s a new message left on your
machine, you need to use the Message Forwarding feature supplied with your machine.
1 Press Menu repeatedly, and press OK when SETUP TAM appears.
2 Select Message Forward by pressing Scroll buttons, and press OK .
The display shows Off or On whenever you press Scroll buttons.
• Off: disables message forwarding
• On: forwards a message to your new location
3 Press OK after selecting On .
4 Enter the fax number and press OK .
If you have ever recorded a Paging OGM before, the machine asks if you want to change.
If there is no recorded OGM, the machine asks to record OGM.
5 To change or record the Greeting press OK , and speak into the microphone.
Or, press Stop/Clear to keep as it is.
If your model is Receive mode In case
SF-360/SF-361P Fax -
SF-365TP TAM TAM message is recorded
Fax no TAM message