Ta pe re cor din g – Sharp XL-E80 User Manual
Page 23
23
XL-E80
T
a
pe Re
cor
din
g
To stop recording:
Press the button.
The tape will stop. When the button is pressed again, the disc will
stop.
To perform programmed recording:
!
Recording from the radio
To stop recording:
Press the button.
Note:
If you hear a whistling noise while recording an AM station, move
the AM loop antenna.
!
Erasing recorded tapes
To interrupt recording:
Press the TAPE
(
) button.
To resume recording, press the
( ) button.
1 Program tracks (see page 18).
2 Press the TAPE
(
) button.
3 Press the
( ) button.
1
Tune in to the desired station (see page 19).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the TAPE
(
) button.
Recording will be paused.
4
Press the
( ) button to start
recording.
To interrupt recording:
Press the TAPE
(
) button.
To resume recording, press the
( ) button.
1
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2
Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3
Press the TAPE
(
) button.
4
Press the
( ) button to start erasing.