Silvercrest KH2610 08/2009-V3 - Manual (Page 26)

Troubleshooting
GB
28 KH 2610
Safety instructions
WARNING
Observe the following safety information to avoid danger and
property damage:
Repairs to electronic devices may only be carried out by spe- ►
cialists who have been trained by the manufacturer. Consider-
able danger to the consumer and damage to the device can
occur as a result of incorrect repairs.
Malfunction causes and remedies
The following table will help with localizing and remedying minor
malfunctions:
Malfunction Possible cause Solution
LED does not light up
The device is not con-
nected correctly.
Connect the device.
Poor image quality
Dust on the scanner
lens.
Clean the scanner lens.
Dust on the fi lm and/or
the slide Clean the fi lm and/or
the slide.
NOTICE
If you cannot solve the problem with the aforementioned methods ►
please contact customer service.
IB_KH2610_37970_LB3A.indb 28 26.10.2009 12:35:12 Uhr