Sony 32LX1 - Manual (Page 23)

23
(GB)
Watching the Picture
Preset input signals
Signal name
Color system or horizontal/
vertical frequency
Computer signals
1 VGA a) -1 (VGA 350) 31.5 kHz 70 Hz
2 640 ×480@60 Hz (VESA b) STD) 31.5 kHz 60 Hz
3 Mac c) 13" 35.0 kHz 67 Hz
4 VGA (VGA TEXT) 31.5 kHz 70 Hz
5 800 ×600@60 Hz (VESA STD) 37.9 kHz 60 Hz
6 Mac 16" 49.7 kHz 75 Hz
7 1024 ×768@60 Hz (VESA STD) 48.4 kHz 60 Hz
8 1024 ×768@75 Hz (VESA STD) 60.0 kHz 75 Hz
9 1024 ×768@85 Hz (VESA STD) 68.7 kHz 85 Hz
10 1152 ×864@75 Hz (VESA STD) 67.5 kHz 75 Hz
11 Mac 21" 68.7 kHz 75 Hz
12 1280 ×960@60 Hz (VESA STD) 60.0 kHz 60 Hz
13 1280 ×1024@60 Hz (VESA STD) 64.0 kHz 60 Hz
14 1600 ×1200@60 Hz (VESA STD) 75.0 kHz 60 Hz
15 848 ×480@60 Hz (VESA STD) 29.8 kHz 60 Hz
16 848 ×480@60 Hz (VESA STD) 29.5 kHz 60 Hz
17 848
×480@75 Hz
37.7 kHz 75 Hz
18 1280 ×768@60 Hz 47.8 kHz 60 Hz
19 1280 ×768@60 Hz 47.4 kHz 60 Hz
SDTV/HDTV
1 PAL PAL
2 NTSC NTSC
3 SECAM SECAM
4 NTSC4.43 NTSC4.43
5 PAL60 PAL60
6 PAL-M PAL-M
7 PAL-N PAL-N
8 575/50i 575/50I
9 480/60i 480/60I
10 1080/24psf 1080/48I
11 1080/50i 1080/50I
12 576/50p 576/50P
13 480/60p 480/60P
14 1080/60i 1080/60I
15 720/60p 720/60P
16 720/50P 720/50P
a) VGA is a registered trademark of International Business
Machines Corporation, U.S.A.
b) VESA is a registered trademark of the Video Electronics
Standards Association.
c) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
Notes
• When inputting an HDTV signal, input the tri-level
sync signal to the 2nd pin of RGB/COMPONENT
(D-sub 15 pin) on the INPUT2 connector or the
BKM-FW12.
• If colors appear too light after inputting a DVD
signal to the display unit, adjust the “Chroma”
setting in the Adjust Picture menu.
• When the phase is readjusted, the resolution will be
reduced.
Actual on-screen display of the unit’s status
On-screen display Significance
640 ×480 / 60 (e.g.) The selected input signal is
computer RGB.
480 / 60i (e.g.) The selected input signal is
component video.
NTSC (e.g.) The selected input signal is NTSC.
Out of Range The input signal is out of the
capture range.
No Sync There is no input signal.
INPUT1 DVI The signal mode of INPUT1 is set to
digital RGB.
INPUT2 RGB The signal mode of INPUT2 is set to
analog RGB.
INPUT2 Component The signal mode of INPUT2 is set to
component video.
Option 1/2 Video The signal mode of Option 1 or 2
slot is set to composite video.
Option 1/2 S Video The signal mode of Option 1 or 2
slot is set to S VIDEO.
Option 1/2 RGB The signal mode of Option 1 or 2
slot is set to analog RGB.
Option 1/2 The signal mode of Option 1 or 2
Component slot is set to component video.