Sony 32LX1 - Manual (Page 15)

15
(GB)
Connections
1
2
3
Using the cable holders
You can neatly bundle the cables with the cable
holders (
×6) provided. Select six out of eight holes for
the cable holders. Attach the cable holders as shown
in the illustration below.
Rear
Inset the cable holder into
the hole on the unit and
rotate it about 90 degrees.
Cable management
The display has the cable covers on its back. Before
connecting the cables to the display, pull the cable
covers to open. After connecting the cables to the
display, close the cable covers.
Cable cover (bottom)
Cable cover
When you connect the speakers SS-SP42FW (not
supplied), route the speaker cords through the speaker
cord holders on the rear of the display unit. (Only for
the FWD-42LX1/42LX1E)
Cable holder
Speaker cord holder
(Only for the FWD-
42LX1/42LX1E)