Sony 32LX1 - Manual (Page 32)

32
(GB)
Viewing two pictures at
the same time
You can show two pictures from different signal
sources, such as a computer and a video, side by side.
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode:
Adjust Picture
Adjust Sound
Standard
Set ENTER Exit MENU Select
2
Press M/m to move the cursor (yellow) to
“PICTURE AND PICTURE (PAP)” and press
ENTER.
The PICTURE AND PICTURE (PAP) menu
appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture
Picture Size
Picture Position
Off
Exit MENU Select Set ENTER
3
Press M/m to move the cursor (yellow) to “PAP”
and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture
Picture Size
Picture Position
Off
Exit MENU Select Set ENTER
Off
P&P
PinP
4
Select the PAP mode with M/m.
Off: Disables PAP function.
P&P: Shows two pictures side by side at the same
time.
PinP: Shows an inset picture on the main picture.
5
Press ENTER to return to the previous screen.
Activating a picture or swapping the
positions of two pictures
When P&P is selected
1
Press M/m to move the cursor (yellow) to “Active
Picture” and press ENTER.
The following menu appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
P&P
Exit MENU Select Set ENTER
Left
Right
Swap
2
Select the Active Picture mode with M/m and
press ENTER.
When you make the menu appear, the frame
appears around the picture for which you can
currently adjust the setting.
Left: Activates the picture on the left.
Right: Activates the picture on the right.
Swap: Swaps the position of the two pictures.
When PinP is selected
1
Select “Active Picture” with M/m and press
ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Exit MENU Select Set ENTER
Main
Sub
Swap
2
Select the Active Picture mode with M/m and
press ENTER.
When you make the menu appear, the frame
appears around the picture for which you can
currently adjust the setting. The audio
corresponding to the currently active picture is
output.
Main: Activates the main picture.
Sub: Activates the inset picture.
When you make the menu appear while the sub
picture is the picture for which you can
currently adjust the setting, the frame appears
around the sub picture.
Swap: Swaps the main and the inset pictures.
Viewing two pictures at the same time