Sony 32LX1 - Manual (Page 33)

33
(GB)
Zooming in on a picture
When P&P is selected
1
Select “Picture Size” with M/m and press ENTER.
2
Keep pressing </, to change the size of the
picture, then press ENTER.
When PinP is selected
1
Select “Picture Size” with M/m and press ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Main
Exit MENU Select Set ENTER
Large
Small
2
Press M/m to select the size, then press ENTER.
Large: Increases the size of the inset picture.
Small: Decreases the size of the inset picture.
Adjusting the position of the inset
picture (For PinP only)
1
Select “Picture Position” with M/m and press
ENTER.
PICTURE AND PICTURE(PAP)
PAP:
Active Picture:
Picture Size:
Picture Position
PinP
Main
Small
Exit MENU Select Set ENTER
2
Adjust the position of the inset picture with M/m/
</,, then press ENTER.
Viewing two pictures at the same time
Notes
• You can show two pictures only when “Multi
Display” is set to “Off.”
• While showing two pictures, the settings of
“Brightness” and “Contrast” adjust the balance
between the two pictures.
• You can select any of the following combinations of
input signals for the PICTURE AND PICTURE
function.
PC
+
PC
PC
+
Video/
(Digital) (Analog) S Video
Input1 + Input2 Input1 + BKM -FW10
Input1 + BKM -FW12 Input2 + BKM -FW10
Input1 + BKM -FW11
PC
+ Component
PC
+
Digital
(Analog) Video
Input1 +
BKM
-FW11 Input2 + Input1
Input1 + Input2 BKM -FW12 + Input1
Input2 + BKM -FW11 BKM -FW11 + Input1
Input1 + BKM -FW12
Input2 + BKM -FW12
Video/
+ Component
Component +
Component
S video (up to 480i)
BKM -FW10 + Input2 Input2 + BKM -FW11
Input2 + BKM -FW12
Digital
+ Component
Digital
+
Video/
Video Video S video
Input1 + BKM -FW11 Input1 + BKM -FW10
Input1 + Input2
Input1 + BKM -FW12
Recommended combinations
• 2 motion pictures of different TV systems may not
be displayed properly due to difference in the signal
format.