Siemens HT-Q100 - Manual (Page 28)

ENG
54
Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
AV SYNC Setup
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
2 1
• Setup menu appears.
3
Press Cursor , buttons
to move to ‘Audio’ and then
press
ENTER button.
Press Cursor , buttons
to move to ‘AV-SYNC’ and
then press
ENTER button.
Press the MENU button.
4
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor , buttons
to select the AV-SYNC Delay
Time and then press the
ENTER button.
MOVE ENTER EXIT
MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT
MOVE ENTER EXIT
53
2 1 Tune in to the
desired station.
Press the TUNER
button to select the
FM band.
Automatic Tuning 2
Manual Tuning
2 1 Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
FM band.
Press the STOP ( )
button to selec "MANUAL"
and then press and hold
button to automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
Listening to Radio
RADIO OPERA
TION
41~64p(Q100)-XAA 2006.4.18 12:22 PM Page 12