Sony HVR-1500A - Manual (Page 8)

SPECIFICATIONS
*1 The HVBK-1520 Format Converter Board is required for up- or cross-conversion to these signals and output of these signals from the HD-SDI interface.
*2 The HVBK-1505 Analogue Input Board is required.
*3 Component, composite and S-Video inputs share the same BNC connectors.
*4 Component, composite and S-Video outputs share the same BNC connectors.
*5 HDV and DV streams share the same i.LINK connector.
*6 The HVR-1500A can play back but cannot record 720/30P signals. When 720/30P recordings are played back, their signals are converted to 720/59.94P signals.
*7 In this table, "60i", "60P", and "30P" indicate a field rate of 59.94 Hz, a frame rate of 59.94 Hz and a frame rate of 29.97 Hz, respectively.
HVR-1500A
50i system 60i system* 7
Recording/playback performance
Recording format
HDV 1080/50i , DVCAM , DV (SP) HDV 1080/60i , DVCAM , DV (SP)
Playback format HDV 1080/50i, DVCAM, DV (SP), DVCPRO 25 HDV 1080/60i, HDV 720/30P* 6 , DVCAM, DV (SP), DVCPRO 25
HD-SDI output format 1080/50i* 1 , 720/50P* 1 1080/60i* 1 , 720/60P* 1
Tape speed HDV/DV SP 18.831 mm/s 18.812 mm/s
DVCAM 28.221 mm/s 28.193 mm/s
Playback/recording time HDV/DV SP Max. 276 min with PHDV-276DM cassette
Max. 63 min with PHDVM-63DM cassette
DVCAM Max. 184 min with PDV-184N cassette
Max. 40 min with PDVM-40N cassette
Fast forward/rewind time Approx. 3 min with PHDV-276DM and PDV-184N cassette
Video Input
Digital video
HD-SDI SMPTE 292M compliant
SD-SDI
(BNC type x1)
Conforms to Serial Digital Interface (270Mb/s), ITU-R BT. 656 Conforms to Serial Digital Interface (270Mb/s), SMPTE 259M
Analogue video Ref. video (HD/SD) (BNC type x2, HD: bipolar tri-level sync, 0.3 Vp-p, 75 Ω , sync negative HD: bipolar tri-level sync, 0.3 Vp-p, 75 Ω , sync negative
loop-through connection)* 3 SD: black burst or composite sync, 0.3 Vp-p, 75 Ω , sync negative SD: black burst or composite sync, 0.286 Vp-p, 75 Ω ,sync negative
Component* 2 (BNC type x3)* 3 Y: 1.0 Vp-p, 75 Ω , sync negative Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y: 0.7 Vp-p, 75 Ω , (100% colour bars) R-Y: 0.7 Vp-p, 75 Ω , (75% colour bars)
B-Y: 0.7 Vp-p, 75 Ω , (100% colour bars) B-Y: 0.7 Vp-p, 75 Ω , (75% colour bars)
Composite* 2 (BNC type x2,
1.0 Vp-p, 75 Ω , sync negative
loop-through connection)* 3
S-Video* 2 (BNC type x2)* 3 Y: 1.0 Vp-p, 75 Ω , sync negative Y: 1.0 Vp-p, 75 Ω , sync negative
C: 0.3 Vp-p, 75 Ω (at burst level) C: 0.286 Vp-p, 75 Ω (at burst level)
Audio Input
Digital audio
AES/EBU (BNC type x2) Conforms to AES-3id-1995
Analogue audio* 2 Audio (XLR 3-pin female x2) +4/0/-3/-6 dBu, high impedance, balanced +4/0/-6 dBu high impedance, balanced
Vidio Output
Digital video
HD-SDI (BNC type x2) Conforms to Serial Digital Interface (1.485, 1.485/1.001 Gb/s), SMPTE 292M
SD-SDI (BNC type x2) Conforms to Serial Digital Interface (270 Mb/s), ITU-R BT.656 Conforms to Serial Digital Interface (270 Mb/s), SMPTE 259M
Analogue video Component (HD) (BNC type x3)* 4 Y: 1.0 Vp-p, 75 Ω , sync negative
R-Y: 0.7 Vp-p, 75 Ω
B-Y: 0.7 Vp-p, 75 Ω
Component (SD) (BNC type x3)* 4 Y: 1.0 Vp-p, 75 Ω , sync negative Y: 1.0 Vp-p, 75 Ω , sync negative
R-Y: 0.7 Vp-p, 75 Ω , (100% colour bars) R-Y: 0.7 Vp-p, 75 Ω , (75% colour bars)
B-Y: 0.7 Vp-p, 75 Ω , (100% colour bars) B-Y: 0.7 Vp-p, 75 Ω , (75% colour bars)
Composite (BNC type x1)* 4 1.0 Vp-p, 75 Ω , sync negative
S-Video (BNC type x2)* 4 Y: 1.0 Vp-p, 75 Ω , sync negative Y: 1.0 Vp-p, 75 Ω , sync negative
C: 0.3 Vp-p, 75 Ω (at burst level) C: 0.286 Vp-p, 75 Ω (at burst level)
Monitor video (BNC type x1) Composite, 1.0 Vp-p, 75 Ω , sync negative, with superimposed text information
Audio Output
Digital audio
AES/EBU (BNC type x2) Conforms to AEC-3id-1995
Analogue audio Audio (XLR 3-pin male x2) +4/0/-3/-6 dBu, 600 kΩ loading, low impedance, +4/0/-6 dBu, 600 kΩ loading, low impedance balanced
Monitor (RCA pin x1) -∞ to -9 dBu ±1 dB (-18 dBFS), 47 kΩ , unbalanced -∞ to -11 dBu ±1 dB (-20 dBFS), 47 kΩ , unbalanced
Headphones (JM-60 iack x1) -∞ to -11 dBu (-18 dBFS), 8 Ω , unbalanced -∞ to -13 dBu (-20 dBFS), 8 Ω , unbalanced
i.LINK Interface
i.LINK 6-pin x1* 5 IEEE 1394-based
Time Code Input/Output
TC In
BNC type x1 0.5 Vp-p to 18 Vp-p, 3.3 kΩ , unbalanced
TC Out BNC type x1 2.2 Vp-p ±3 dB (when 600 Ω terminated), unbalanced
Remote
RS-422A
D-sub 9-pin (female) x1
Control-S (SIRCS) Stereo mini jack x1
General
Mass
6.9 kg (15 lb 3 oz)
Dimensions (W x H x D) 211 x 130 x 420 mm (8 3/8 x 5 1/8 x16 5/8 inches)
Power requirement AC 100 V to 240 V, 50/60 Hz
Power consumption 60 W
Operating temperature 5 ˚C to 40 ˚C (41 ˚F to 104 ˚F)
Storage temperature -20 ˚C to 60 ˚C (-4 ˚F to 140 ˚F)
Operating relative humidity Less than 80%
Storage relative humidity Less than 90%
Supplied Accessories
AC power cord x1, Operating instructions x1
©2008 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, DVCAM, i.LINK, DigitalMaster, HDCAM, XDCAM and their respective logos are trademarks of Sony Corporation.
HDV and the HDV logo are trademarks of Sony Corporation and Victor Company of Japan, Limited.
DVCPRO is a trademark of Matsushita Electric Industrial Co., Ltd.