Sprint Nextel Telephone - Manual (Page 54)

38 Section 2A: Phone Basics
Dialing From the Contacts List
To dial directly from a Contacts entry:
1. Select >Contacts > Find/Add Entry.
2. Highlight the entry you want to call and press to dial
the entry’s default phone number.
– or –
To dial another number from the entry, highlight the
name and press
, and then highlight the number you
wish to call and press .
Using Speed Dialing
With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See “Assigning Speed Dial
Numbers”on page 101.)
Touse speed dial :
ᮣ
From standby mode, press and hold the appropriate key
for approximately two seconds. The display confirms
that the number has been dialed when it shows
“Connecting...”.
Note: Speed dialing may not be available when you are roaming;
when you are roaming off the Sprint National Network, you
must always dial using 11 digits (1 + area code + number).
Shortcut: From the standby mode, select Contacts (right softkey) to
display the Contacts list.