Sony CMT-EX200 - Manual (Page 21)

Additional Information
21
Messages
One of the following messages may appear or
flash in the display during operation.
CD
NO DISC
There is no CD.
OVER
You have reached the end of the CD while
pressing M during play or pause.
STEP FULL
You tried to program 25 or more tracks (steps).
Specifications
Main Unit (HCD-EX200)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohms loads, both channels driven, from
120 – 10,000 Hz; rated 12 watts per channel
minimum RMS power, with no more than 10% total
harmonic distortion from 250 milli watts to rated
output.
Canadian model:
Continuous RMS power output (Reference):
15 + 15 watts
(4 ohms at 1 kHz,
10% THD)
Inputs
PC/TAPE IN:
voltage 250 mV,
impedance 47 kilohms
Outputs
PC/TAPE OUT:
voltage 250 mV,
impedance 1 kilohms
CD DIGITAL OUT: Optical
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Frequency response 20 Hz – 20,000 Hz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
(100 kHz step)
Antenna FM wire antenna
Antenna terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz
continued