Sharp OZ-290H - Manual (Page 26)

24
Positioning the unit
Close the cover, and insert the unit into the carrying case as shown in
the illustration, then make sure that the top flap is fastened.
Secure the carrying case clip to your belt or to the top of your shorts or
pants.
The unit must be attached in vertical position to the ground in order to
count steps correctly.
• Make sure that the holder’s clip is secured firmly in place. If worn
improperly, the unit may be detached or may result in incorrect
measurements.
• The belt clip is designed to hold the unit while walking. The clip may
not hold the unit or may break if it is exposed to a high-impact
condition such as running, or playing basketball.
The unit may not count steps correctly if you:
• Walk at an irregular pace, or in a crowded place.
• Shuffle legs excessively.
• Wear sandals when walking.
• Vary your movement (play sports, for example).
• Move up/down excessively.
• Are in a vehicle with vertical and horizontal motions.
• Attach the unit improperly (tilted, for example).
Pedometer Mode
Set the pedometer to ON/OFF. To count steps, set it to ON.
Tap
CLOCK , tap MENU , and select “PEDOMETER SET” in the MENU
mode, then press ENTER , use k or m to select “ON”, then press
ENTER and start walking. To turn off the pedometer, select “OFF”.
Viewing the step count and calorie values
1. Tap the DIET once, twice, or three times to enter the Diet Function
Mode.
2. Select “PEDOMETER” using k or
m, and press ENTER twice to
display the interim report of
calories burned and total step
count.
Tap
C•CE to return to the
previous screen.
• Step count of the day will be registered automatically when the
time is at “23:59:59”.
• This unit calculates the calorie consumption with the following
formula*:
Calorie consumption [Kcal] = (step
× stride [inch] Ч 2.54 Ч 0.001 +
3.5) Ч weight [lb] Ч 0.45359237 Ч 0.005
150.
STEP
3
I E Kc a l CALOR
–2005 3–2 1
80. 2 1
Clip
OZ-290H(En).pm65 04.3.31, 5:09 PM 24