Signature Housewares SIG100-97 - Manual (Page 12)

10
Buttons initial status for Normal program
Normal/Fast
Normal/Slow
Delicate/Fast
Delicate/Slow
Speed
Wash/Spin
Load Size
Soil level
Stain Wash
Heavy
Normal
Light
Normal
Heavy Duty
Whites
Delay
Start
Cycles
Quick Wash
Delicate Casual
Hand Wash
Soak
Wash
Rinse
2ND Rinse
Spin
Process
Hot/cold
Warm/Cold
Cold/Cold
Temp
Wash/Rinse
Louder
Softer
Off
Cycle
Signal
Start
Pause
Power
On/Off
Cycle Signal Softer
Temp Wash/Rinse Warm/Cold
Process Soak, Wash, Rinse, Spin
Cycles Normal
Nixie display Remaining min. of the present cycle
Soil level
Heavy
Load Size 6
Speed Wash/Spin Normal/Fast
Upon switching on the power, the computer board buzzes once and the unit
enters from standby to working status, i.e. initial status (Normal program);
5 minutes after switching on, if Start/Pause button isn't pressed, the unit will
automatically switch off and return to standby;
Pressing Power On/Off button, all programs will stop and the unit enters standby,
regardless of the computer conditions (start, pause, alarm etc.).
The washer has intelligent wash resumption. After the power is cut off abnormally,
the washer could resume working at stoppage while the power resumption.
1. Press Power On/Off to switch on the power supply
Power
On/Off
The unit returns to standby immediately after completion of a program;
b Operating procedure
Time Remaining
Time On