Precautions, Troubleshooting, Location of parts and controls – Sony WM-EX362 User Manual

Page 2: Preparations, Playing a tape, Specifications, About this manual

Advertising
background image

About This manual

The instructions in this manual are for WM-EX364 and
WM-EX362. Before you start reading, check your model
number. WM-EX364 is the model used for illustration
purposes. Any differences in operation are clearly
indicated in the text, for example, “EX364 only”.

Precautions

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or
sand, moisture, rain, mechanical shock, or in a car with
its windows closed.

• Do not wind the headphones/earphones cord around

the unit. The buttons may be kept pressed, causing
unnecessary battery usage.

• Do not use cassettes longer than 90 minutes except for

long continuous playback.

• If the unit has not been used for a long time, set it in the

playback mode to warm it up for a few minutes before
inserting a cassette.

• For cleaning the case, use a soft cloth slightly moistened

with mild detergent solution. Do not use alcohol,
benzine or thinner.

If you have any questions or problem concerning your
Walkman, please consult your nearest Sony dealer.

Troubleshooting

The volume is not turned up.
•AVLS is set to LIMIT.

The sound is unstable or no audio.
•Insert two R6 (size AA) batteries properly.
•Replace all batteries if they are weak.

Poor tape playback quality.
•Dirty head. Clean the head and tape path with a

cotton swab slightly moistened with cleaning
fluid or alcohol.

•Clean the headphones/earphones plug.

SAFETY NOTES ON THE UNIT

WARNING

• To prevent fire or shock hazard, do not expose the unit

to rain or moisture.

• Do not use headphones/earphones while driving,

cycling, or operating a motorized vehicle. It may create
a traffic hazard and is illegal in some areas. It can also
be potentially dangerous to play your headphones/
earphones at high volume while walking, especially at
pedestrian crossings. You should exercise extreme
caution or discontinue use in potentially hazardous
situations.

• To prevent shock hazards, never open the unit while it

is connected to the power source.

CAUTION

• Do not use headphones/earphones at high volume.

Hearing experts advise against continuous, loud and
extended play. If you experience a ringing in your ears,
reduce volume or discontinue use.

• Keep the volume at a moderate level. This will allow

you to hear outside sounds and to be considerate to the
people around you.

SAFETY NOTES ON POWER SOURCES

To avoid battery leakage, fire, damage, explosion, etc.,
follow the descriptions below.

DANGER

• Do not carry dry batteries with coins or other metallic

objects. It can generate heat if the positive and negative
terminals of the batteries are accidentally contacted by a
metallic object.

WARNING

• Use only the recommended AC power adaptor (not

supplied). Check also the local voltage to avoid a short
circuit to the AC power adaptor.

• To disconnect the AC power adaptor, only use the plug

and not the cable.

• Do not charge a dry battery.
• Check the

] and } on the batteries, and be sure to

insert them like the illustration in this manual.

CAUTION

• When you are not going to use your Walkman for a

long time, remove the batteries to prevent damage
from battery leakage and corrosion.

Location of parts and controls

EX364

Preparations

To Insert batteries

Battery life (approximate hours)

(EIAJ*)

Sony alkaline

Sony

LR6 (SG)

R6P (SR)

Playback

22

7

* Measured value by the standard of EIAJ (Electronic

Industries Association of Japan). (Using a Sony HF
series cassette tape)

Notes

• The battery life may shorten depending on the

operation of the unit.

• For maximum performance we recommend that you use

alkaline batteries.

• If the battery compartment lid comes off, attach it as

shown.

To use external power

• For house current: Connect AC-E30HG AC power

adaptor (not supplied) to the DC IN 3V jack. The
polarity of the plug is as shown.

• Specifications for AC-E30HG varies for each area. Check

your local voltage and the shape of plug before
purchasing.

To use the belt clip

When Using Headphones/Earphones

Wear the “L” marked side to the left ear and the “R”
marked side to the right ear.

Playing a tape

1

Select NORM or CrO

2

/METAL to match

the tape type.

2

Insert a cassette and press

9 PLAY.

To

Press or Switch

Stop playback*

pSTOP

Fast-forward

)or0 (For the

or rewind the tape**

side facing forward)

Change sides

DIR

Play both sides once

MODE to

Å

Play both sides repeatedly

MODE to

a

* When the tape direction is set to

Å mode, the

depressed button

9PLAY is released automatically at

the end of the reverse side (Auto shut-off function).

To limit the maximum volume
automatically
Set AVLS

(Automatic Volume Limiter System)

to

LIMIT. The maximum volume is kept down to
protect your ears, even if you turn the volume up.
To cancel the AVLS function, set AVLS to NORM.

To emphasize sound
To emphasize deep bass sound, set the switch to
MEGA BASS. To emphasize deeper bass sound, set
the switch to GROOVE.

To play a tape recorded with Dolby* NR
system (EX364 only)
Set DOLBY NR to ON.

* Dolby noise reduction manufactured under license from

Dolby Laboratories Licensing Corporation.
“DOLBY”and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.

Notes

• When you set AVLS to LIMIT:

- the MEGA BASS/GROOVE effect is reduced.
- turn down the volume, if the bass-boosted sound

becomes distorted or unstable.

• Do not open the cassette holder while the tape is

running.

• To select the direction of the tape, set MODE to

a for

both sides repeatedly or

Å for both sides once (from

the front side to the reverse side only). If play begins
from the reverse side, the tape stops at the end of that
side.

polarity of the plug

R6 (AA)

×

2

DC IN 3V

2

1

PLAY

0

p

STOP

VOL

DIR

MODE

)

DOLBY NR

MEGA BASS/
GROOVE/
NORMAL

9PLAY

2

AVLS

(Tape selector)

NORM, CrO

2

/METAL

CrO

2

/

METAL

TAPE

NORM

Specifications

• Power requirements

3V DC batteries R6 (AA) x 2/External DC 3V power sources

• Dimensions

112.9 x 87.6 x 33.4 mm (4

1

/

2

x 3

1

/

2

x 1

3

/

8

inches) (w/h/d)

incl. projecting parts and controls

• Mass

Approx. 130g (4.6 oz) /Approx. 210g (7.5 oz) incl. batteries
and a cassette

• Supplied accessories

Stereo headphones (1)/Belt clip (1)

Design and specifications are subject to change without notice.

** Notes on fast-forward and rewind
• Check tape direction and choose

) or 0

accordingly.

• If you leave the unit after the tape has been wound or

rewound, the batteries will be consumed rapidly.
Be sure to press

pSTOP.

2

1

Advertising