Snapper 1695419 - Manual (Page 15)

15
Storage & Maintenance
STORAGE
Daily Storage
Note: Refer to the tractor Operator’s Manual for
important information concerning safely storing your
tractor.
1. Allow tractor engine to cool before storing in any
enclosure.
2. After jobs are completed, hose or brush down the
unit to remove dirt and debris.
3. Lightly grease or oil all pivot points. Coat bare
metal surfaces to prevent corrosion.
Long Term Storage
1. Use water pressure or brush to thoroughly clean
the unit.
2. Paint, or lightly coat with oil, any area where paint
has been worn or chipped away.
3. Thoroughly lubricate the unit.
4. Store in a dry place.
MAINTENANCE
WARNING
To avoid serious injury, perform maintenance
on the tiller only when the engine is stopped,
parking brake is set, and all moving parts have
stopped. Always remove the ignition key
before beginning maintenance or adjustments
to prevent accidental starting of the engine.
Maintenance Schedule
Care Required
Clean debris from unit.
Lubricate unit.
Check drive belt.
Schedule
After each use.
Every 5 hours or at least
once a year.
Every 50 hours or at
least once a year.
TILLER SHAFT
UNDERSIDE OF TILLER
Note: Keep grease and oil off belts.
Note: Keep grease and oil off belt and pulleys.
Symbol Use Apply With Procedure
Lithiium base automotive grease Grease gun 1. Wipe fitting clean with rag.
2. Apply 2 or 3 shots of grease.
3. Wipe up any excess grease.
SAE 30 Oil Oil can Clean indicated area and apply 2
or 3 drops of oil.
Maintenance