Summit ENG. 4358-3412E - Manual (Page 8)

12
5
Place the child’s bottom
and back flat against the
child restraint.This will
increase comfort and
allow the harness to
properly tighten.
Harness
Guide
7
Check Harness Height
Forward-Facing
Position: Harness guide
must be
even with or
just above the shoulders.
If the harness is below
the child’s shoulders with
the headrest in the 3rd
highest position, the child
weighs at least 40 lbs.
(18.1 kg) and is over 1
year old, convert the seat
to a belt-positioning
booster.
Adjust Buckle:
Determine which of the
three available buckle
slots is both comfortable
and snug. Refer to
“Removal of Harness” to
adjust buckle.
6
Harness Covers (on
select models): Harness
covers help provide
comfort to the neck. For
Harness Covers to fit
correctly, you may have to
fit the upper ends of the
covers through the harness
slots. To remove the
covers, unthread the
harness from harness
bracket (see belt-
positioning booster
section), remove covers,
and rethread harness.
Reverse to replace insert.
WARNING: !
Make sure metal bar
is locked into
position. Failure to
do this can result in
serious injury or
death.
8
Squeeze the metal bar on
the back of the seat. Move
harness/headrest adjuster
up or down to the position
that correctly fits your
child. Release bar into slot
to lock.
NOTE: The highest
position is for belt-
positioning use only.
13
4358-3412E Summit 3/2/07 2:55 PM Page 15