Samsung AH68-02279R - Manual (Page 27)

English
27
02
Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
Press the FUNCTION button to select D.IN input.
The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported.
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
Be sure to match connector colors.
Press the FUNCTION button to select AUX input.
The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM
NOTE
You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
1.
2.
•
✎



1.
•
2.
•
✎

LAN
HDMI IN HDMI OUT
VIDEO OUT
COMPONENT OUT
OPTICAL
DIGITAL
AUDIO IN
LAN
HDMI IN HDMI OUT
VIDEO OUT
COMPONENT OUT
DIGITAL
AUDIO IN
Optical Cable
(not supplied)
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
Set-Top Box
VCR
White Red
OPTICAL AUX
HT-C6900W_XAA_0914.indd 27 HT-C6900W_XAA_0914.indd 27 2010-09-14 2:27:51 2010-09-14 2:27:51