Sony GRAND WEGA KF 60DX100 - Manual (Page 12)

Introducing the Sony LCD Projection TV
12
Notes on the LCD
Projection TV To enjoy clear pictures
❑ Be sure not to allow sunlight or light from a lamp to shine directly onto
the screen.
❑ The screen surface is easily scratched. Do not rub, touch, or tap it with a
sharp or abrasive object (see “Use of the Cleaning Cloth” below).
On moisture condensation
❑ If your LCD projection TV is transported directly from a cold to a warm
location, is placed in a humid room, or if the room temperature changes
suddenly, the picture may be blurred or show poor color. This is
because moisture has condensed on the lenses inside. If this happens,
leave the power on and let the moisture evaporate before using your
LCD projection TV.
When the LCD projection TV will not be used for a long period of time
❑ Turn off the main power of your LCD projection TV before going to
sleep or going out.
When turning off the power
❑ Be sure to turn off the power switch on the main unit or on the remote
control. After turning off the power, the fan will continue to blow for
about two minutes. Be sure to wait for several minutes after turning the
power off when unplugging from the outlet or switching the breaker off.
Use of the Cleaning
Cloth To remove dust from the front of the screen, wipe with the supplied Cleaning
Cloth.
✍
Do not use any type of abrasive pad, alkaline cleaner, scouring powder,
or solvent such as alcohol or benzene. Otherwise, this type of contact
may result in a damaged screen.
✍
To clean the screen, please use the supplied Cleaning Cloth lightly
moistened with water diluted mild detergent solution.
✍
The supplied Cleaning Cloth is washable with warm water and a mild
detergent solution, and can be used repeatedly.