Sharp AR-C360P - Manual (Page 23)

Sharp AR-C360P User’s Guide
Printer and paper overview > 23
Trays and stackers
Trays 1 to 4
Tray 1 is the standard blank paper input tray and can hold up to 530
sheets of 20 lb (75 g/m²) paper. Additional trays (via the High
Capacity Feeder), to give a total of 4, can be added as an option to
give a total tray capacity of 2120 sheets of 20 lb (75 g/m²) paper.
If you have identical paper stock loaded in another tray (for example
Tray 2 or the MP Tray), you can have the printer automatically
switch to that other tray when the current tray runs out of paper.
This function can be enabled by driver settings when printing from a
Windows application or by a menu setting when printing from other
applications.
MP tray
The multi-purpose tray is used for media sizes additional to those of
the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard
trays but in weights up to 71.3 lb (268 g/m²). For very heavy paper
stock use the face-up paper stacker. This ensures that the paper
path through the printer is almost straight.
The multi-purpose tray can feed paper widths as small as 3in
(76.2 mm) and lengths up to 47.24 in (1200 mm). For banner
printing, recommended sizes are Letter wide, 35.43 in and 47.24 in
long and weight 34 lb (128 g/m²).
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 100 sheets of transparencies or 25 envelopes
can be loaded at one time, subject to a maximum stacking depth of
1 in.
Paper or transparencies should be loaded print side up and top edge
into the printer. Do not use the duplex (two-sided printing) function
for transparencies.
Face-down stacker
The face-down stacker on the top of the printer can hold up to 500
sheets of 20 lb (80 g/m²) standard paper, and can handle paper