Skyworth LED-32E60 - Manual (Page 12)

Personal Video Recording(PVR)
1.Please insert the Media drive into the Uplayer slot before selecting record mode.
2.Select the TV program and channel you wish to record.
3.Press [DTV/PVR ] button to enter PVR mode and start recording. PVR control bar on the
screen shown below. You can select the appropriate settings required.
Play Fast Reverse Fast Forward Previous Next Stop Pause
4.In the PVR mode, press [ ] button to enter Time Shift mode, screen icon in the upper
left corner shows[ ]. Press [ ] button again to enter
Time Shift mode, screen
icon in the upper left corner shows [A-B]. Press[ ] button to exit the Time Shift
mode. Press the [ ] button twice to exit Time Shift mode.
5.If you wish to stop the recording, press [ ] button and the recording will stop.
Note: (A) During the record mode, you cannot change channels or select another function.
(B) If the signal is interrupted or removed while in record, the recording will stop until
the signal is established. This may cause you to lose program content.
(C) Please do not turn the TV OFF during recording. This will make the TV exit the
PVR and turn to standby.
(D) The file recorded can only be used in this TV, any copy communication is
communication is strictly prohibited.
Repeat
Repeat
~11~