Appendix c how to use console, Starting console, Message – Samsung Version 1.1 User Manual

Page 68

Advertising
background image

68

APPENDIX C How to Use Console

If any key is pressed within two
seconds, manual setup mode
will appear.

Indicates Ethernet address

Indicates the time elapsed with

SNS-110

Indicates IP address, Subnet
Mask, and Gateway

########################################################

#

#

# SAMSUNG Electronics. Co., Ltd.

#

# webTX(Internet Video Server):SNS-110

#

# Version1.1(2000~2001) All Rights Reserved.

#

#

#

########################################################

>Current status is Flash Memory Boot

>To change system parameter, press any key within 2 seconds

....IP:168.219.13.11

3, SM:255.255.255.192, GW:168.219.13.65

>Web Transmitter Image Loading<

>Ethernet(MAC) address in Cookie : [00-00-f0-ff-a1-ba]

>Network parameters in gstrIP, gstrSubnetMask, gstrGtwyIP

-IP:168.219.13.113 SM:255.255.255.192 GW:168.219.13.65

>Network Interface Installed

>DNS IP address is empty or invalid

************************* HttpPort = [80]

************************* FTP port = [21]

Initializing External Devices... (f_InitExtDev())

EXTACON0 = 06110a59, EXTACON1 = 00000000

Timing COS/ACS/COH/ACC : 1315 1203 0000 0000

init universal timer(#1), 1ms period

system has 4 decoder(s).

all decoders/channels are reset.

rtc init step skipped.

Rtc time : 2001/1/1 [Mon] 04:06:17

reflected os time : 2001/01/01 04:06:17

JpegRESET: write reg 0 <- 0 fail. a0 read

Jpeg reset ok.. loading..

Jpeg header size : 591 (0x24f) bytes

Console allows condition check-up of SNS-110 by connecting to RS-232C port, manually setting network-

related information.

Starting Console

(1) Connect to RS-232C port on the PC in accordance with "Connecting to RS-232C" of "Chapter 3,

Connecting other equipments”

(2) Use Terminal Emulation (Hyper Terminal) from the connected PC to set the values for RS-232C

through Terminal Emulation.

(3) The following message will appear when you turn on the power of SNS -110.

Message

(1) When the power is turned on, the following message will appear on the console screen when

SNS-110 has been successfully installed.

Advertising