Samsung DOT MATRIX SRP-270 - Manual (Page 3)

Samsung SRP-270 Setup & Service Information Driver Installation Information
•
3
Windows 98 SRP-270 Driver Installation
You can download the compressed SRP-270 driver, 270 9xDriver.zip, from the dealer area of
the CRS site,
www.crs-usa.com . Unzip (extract) the files srp270.drv and Samsung.inf.
1. Select Start, then Settings, and then Printers.
2. From the printers dialog, right click the Add Printer icon.
3. From the Add Printer wizard window, click Next.
4. Choose Local Printer, click Next.
5. Click the Have Disk command button. From the Install From Disk dialog box, click
the Browse button to locate the driver file SRP270.drv. Click OK. The wizard
displays the list of drivers for several Samsung printers.
6. Select either SRP270 No Cut (use when paper cutter is not used) or SRP Partial Cut
(use when paper cutter is used) click Next.
7. Select the port to which the printer will be connected and click Next.
8. Enter a printer name and select whether you want your windows based program to use
this printer as the default printer. Click Next.
9. Select whether you wish to print a test page and click Finish. The printer driver
installation is complete.