Sony CS SLV-998HF MX - Manual (Page 26)

Step 3: Hookups (continued)
5 Enter your DSS receiver code number and press SET UP CABLE BOX
CURSOR . For details, see page 40. CABLE BOX CONTROL
CABLE MOUSE ON OFF
BOX CODE NO. -- -- --
BOX OUTPUT CH CH3
Enter your CABLE BOX
Code No. Using 0 - 9 keys
Refer to the Operating
Manual for the Code
6 Set your DSS receiver SET UP CABLE BOX SET UP
output channel (BOX CABLE BOX CONTROL
OUTPUT CH) to LINE CABLE MOUSE ON OFF
and press OK.
BOX CODE NO. -- -- -- SET UP is done
BOX OUTPUT CH CH3
Use to select CABLE
Box CH. Then push OK
Normal display
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
areas do not carry time signals, set the clock manually. For details, see page 37.
Note
* To successfully record a program from the DSS receiver, proceed as follows:
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receiver locked channels, unlock the channel before the VCR starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot record these programs.
26 Getting started