Sharper Image SI857 - Manual (Page 12)

12
Thorough Cleaning
If the unit makes noise during operation, a thorough cleaning of
the grid, grills and internal ionizing wires may be required.
Unplug the unit before cleaning.
Release the OzoneGuard front grill
and back grill by lifting the blue release
tabs on the bottom of the grills.
To remove, slide the grill up.
Note: The OzoneGuard cannot be
detached from the front grill.
The OzoneGuard has sharp edges;
use caution when cleaning.
Use a hair dryer to blow dust from the
interior, or a vacuum to remove the dust.
The grills can be cleaned under a spray
of warm water. Rinse and allow to dry
before returning to unit.
CAUTION: Do not use the product if wires
are broken or either grill appears damaged.
Call 1-800-344-5555 to order a replacement grill.
Release-Tab