Using crust plate – Samsung DE68-03064R User Manual

Page 13

Advertising
background image

13

EN

Using Crust Plate

CE1180GBT/CE1180UBT/CE1180GWT/CE1180GBF/
CE1180UBF/CE1180GWF only
Normally when cooking in microwave oven, using grill or microwave
mode in grill/convection ovens, foods like pastries and pizza become
soggy from button side. Using the Samsung Crust plate helps to gain a
crispy cookde result of your food.
The crust plate can also be used for bacon, eggs, sausages, etc.

Before using the crust plate, preheat it by selecting the combination mode
for 3 to 5 minutes:

Combination of convection (220°C) and microwaves.

(600 W power level)

Combination of grill and microwaves (300 W power level)

See page 17 respectively.

How to clean the Crust plate

As the crust plate has a Teflon layer, if you use it incorrectly, it can be
damaged.

Never cut the food on the plate. Remove the food from the plate
before to cutting into slices.

Turn the food over preferably with a plastic or wooden spatula.

1.

Preheat the crust plate, as described above.

Use oven gloves at all times as the crust plate will
become very hot.

2.

Brush the plate with oil if you are cooking food, such as bacon
and eggs, in order to brown the food nicely.

3.

Place the food on the crust plate.

Do not place any recipients on the crust plate that are not
heat-resistant (plastic bowls for example).

4.

Place the crust plate on the turntable in the microwave oven.

Never place the crust plate in the oven without the
turntable.

5.

Press the Combi button.

Next : Press the blinking button.

6.

Select the appropriate Combination mode by pressing the
Select(

) button.

Next : Turn the blinking dial.

7.

Set the cooking time by turning the Jog Dial until the
appropriate cooking time is displayed.

Next : Press the blinking button.

8.

Press the Start(

) button.

Result:

Cooking starts.

◆ When cooking has finished, the oven will beep

and flash “0” four times. The oven will then
beep one time per minute.

The best way to clean the crust plate is to wash it with hot
water and detergent. Then rinse if off with clean water. Do not
use a scrubbing brush or a hard sponge otherwise the top
layer will be damaged.

jlXX_Wni†ivsTWZW][y†luU”GGwˆŽŒGXZGGm™‹ˆ SGqœ•ŒGXWSGYWW\GGXXaYXGht

Advertising