Installing the projector in proper directions, Safety instructions, Positioning precautions – Sanyo PLC-WU3800 User Manual

Page 7

Advertising
background image

7

Safety Instructions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe

accident or fire hazard.

This projector can project the picture upward, downward or backward, perpendicular to the plane of the screen as

shown in the figure below.

Bottom

Downward

(Usual)

Front

Downward

Bottom

Upward

Front

Upward

Installing the Projector in Proper Directions

Avoid positioning the projector as described below when installing.

Positioning Precautions

Do not roll the projector more than 10 degrees from side to side.

Do not put the projector on either side to project an image.

10˚

10˚

10˚

10˚

10˚

10˚

In upward projection, do not tilt the projector over 10 degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

90º

180 º

40º

50º

140º

50º

40º

Be sure to set the Lamp control in High and the Fan

control in On 3 in the setting menu when using the

projector inclined at between +40 degrees to +140

degrees to the horizontal plane at altitudes between 0

and approximately 1,600 meters above sea level.

Be sure to set the Fan control in On 2 when using the

projector at higher altitudes than the altitudes described

above, regardless of the installation position of the

projector. (p.59).

Advertising