Sony DPP-FPHD1 - Manual (Page 22)

22
x Printing
An error is displayed on the camera and you cannot print images.
• The ink ribbon does not match the paper type. Insert the correct print paper that matches the
ink ribbon loaded to the printer. To change the ink ribbon, stop printing, and replace the ink
ribbon, then resume printing.
Print paper does not feed. The printer may feed multiple paper. The printer may
feed paper diagonally.
• If the print paper is not properly loaded to the printer, it may cause a malfunction. Check the
followings:
– Check if the correct set of print paper and ink ribbon is loaded. ( tpage 11)
– Check if the print paper is inserted in the correct direction. ( tpage 14)
– Check if more than 20 sheets of print paper are in the paper tray. ( tpage 14)
– Check if the print paper is riffled thoroughly.
– Check if the print paper is bent or folded before printing.
– If print paper runs out during continuous printing or if you print with no print paper in the
paper tray, the printer’s ERROR indicator lights on. Feed the print paper without turning off
the power and resume printing.
• Print paper you used is incompatible with the printer. Use print paper designed for the printer.
Using print paper incompatible with the printer may cause a malfunction. (
tpage 11)
• When the printer cannot feed print paper, the ERROR indicator flashes rapidly. Remove the
paper tray and check if there is a paper jam. (
tpage 25)
The print paper comes out while printing is in process.
• The print paper may come out a few times during printing. Do not touch or pull out the paper
that appeared. Wait for the print paper to be fully ejected after printing is complete. As the
print paper comes out of the rear side a few times during printing, make sure to spare enough
space behind the printer by using the paper protector, etc., during printing.
Unable to print.
• You cannot print movies.