Sun Microsystems BLADE T6320 - Manual (Page 14)

6 Sun Blade T6320 XAUI Pass-Through Fabric Expansion Module User’s Guide • July 2008
4. Remove the server module from the system chassis.
5. Remove the main cover of your system.
6. Slide the FEM card at an angle into the support bracket, then press it carefully
into the connector.
FIGURE 2-1 Installing the FEM
Verifying the Hardware Installation
After you install the Sun Blade T6320 XAUI Pass-Through Fabric Expansion Module,
perform the following tasks to verify the installation.
▼ To Verify the Hardware Installation
1. Power on the system.