Sony PCV-W10 - Manual (Page 9)

i.LINK Compatibility
9
i.LINK Compatibility
Your VAIO computer has two 4-pin i.LINK ports available to connect your
digital devices. A 4-pin i.LINK port does not supply power to a connected
device.
The following i.LINK 400 Mbps cables are available and recommended for use
with your computer: VMC-IL4415, VMC-IL4435, VMC-IL4615, and
VMC-IL4635. Sony computer supplies, accessories, and peripherals can be
purchased from Sony VAIO Direct through the Web site at
http://vaio.sonystyle.com or the toll-free number, 1-888-315-7669.
Connecting an i.LINK (IEEE 1394) device
1 Use the symbol to locate the i.LINK port on your compatible i.LINK
device and on your computer. Plug the i.LINK cable connector into this port.
2 Plug the other end of the cable into the corresponding 4-pin i.LINK port on
your computer.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an
IEEE 1394 connection. The i.LINK connection may vary, depending on the software
applications, operating system and compatible i.LINK devices. All products with an
i.LINK connection may not communicate with each other.
Refer to the documentation that came with your compatible i.LINK device for
information on operating conditions and proper connection. Before connecting i.LINK
devices to your system, confirm the device’s operating system compatibility and
required operating conditions.
To connect a 4-pin i.LINK device
i.LINK cable (optional)