Smeg AS 73 CS User Manual

Page 19

Advertising
background image

19 - EN

For the condenser (products with a

condenser)

Hot and humid air in the condenser is

cooled with the cold air from the room.

Thus, the humid air circulating in your

dryer is condensed and then pumped

into the tank.

C

Clean the condenser after every 15

drying cycles or once a month.

To clean the condenser:

1. If a drying process has been carried

out, open the door of the product and

wait until it cools down.

2. Unlock the 4 condenser locks after

opening the kick plate.

3. Pull out the condenser.

4. Clean the condenser with pressurized

water and wait until the water drains.

5. Replace the condenser with the side of

it labelled with “Top” facing upwards.

Lock the 4 condenser locks. Make sure

that the red lock on the upper right

corner is engaged securely.

6. Close the kick plate cover.

Close properly and

check the locking

latchs?

Advertising