Samsung iDCS 500-DCS - Manual (Page 28)

!
51 50
• Dial any message code (01-30) listed on the back of this user guide or
press UP or DOWN to select any message you desire. Messages 26-30
are used for inserting a date or time. If you select one of these messages
(26-30), your phone will wait for five more digits to be entered. At this
point you will enter two digits for hour or month (01-23) and two digits for
day or minutes (00-59). The fifth and final digit to be entered is a ✱ locat-
ed on your dial pad to select “a” for A.M., “p” for P.M. or “/” for date.
Depressing the ✱ button on your dial pad will scroll through these three
options (“a”, “p”, and “/”).
• Press TRSF to exit and store your selection.
To cancel any of these messages:
• With the handset on-hook, dial 48 plus 00, OR
• With the handset on-hook press TRSF and then dial 115 plus 00 and
TRSF again to exit.
TEXT MESSAGING
[L VERSION ONLY]
This feature allows two digital keyset users to respond to each other with
preprogrammed messages. After receiving an Off Hook Voice
Announcement or Station Camp-On, you may respond with a text message
while continuing to talk and listen to your outside party. The other station can
view this message and take the appropriate action or respond back with
another text message.
There are 25 messages (01-25) stored in system memory that can be sent
to another display keyset. Only the display keysets that are allowed in sys-
tem programming (MMC 318) will receive the TMSG softkey in the display
and use this feature.
Familiarization with the two digit message numbers you will use the most will
make this procedure quick and easy. However if you do not know them, use
the UP/DOWN key to scroll to the desired message, then press SEND.
The basics steps in text messaging are:
1. Press TMSG soft key to begin text messaging.
2. Dial the 2 digit number for the desired message.
3. Confirm this is the intended message then press SEND.
4. Wait for a reply from the other station (steps 1, 2 & 3)
5. When any station presses EXIT the displays at both stations return to
their previous call progress condition.
At all times after step 1 you can talk and listen to your caller while repeating
steps 2.
The example on the following page will better demonstrate how to use Text
Messaging. In this example station 205 is making an off hook voice an-
nouncement to station 205 who after hearing the announcement will re-
spond with a text message.
STATION 201: LINDA STATION 205: JOHN
received a call on line 702 is talking on line 701
Talking on line 702
702: 01:15 701: 05:25
CONF PAGE MUTE
Press TRANSFER
Transfer:
RETURN
Dial 205
205:busy
OHVA CAMP ON
OHVA to 205 OHVA from 201
TMSG REJECT
Wait for reply GIVE THE CALL
TMSG:01 SEND
Dial 03 or press " twice
ASK THEM TO HOLD
TMSG:03 SEND
ASK THEM TO HOLD Wait for reply
TMSG EXIT
702: 01:45 701: 05:55
CONF PAGE MUTE CONF PAGE MUTE
!
!