SIGMA C21EN0291 - Manual (Page 29)

INSERTING AND REMOVING THE CF CARD
TO REMOVE THE CF CARD
1
Set the “D”-Dial to the OFF position.
· Make sure that the CF card busy light is off
before continuing.
2
Slide the cover release lever downward until the
CF card cover pops open.
3
Press the eject button to eject the CF card.
4
Remove the CF card and close cover until it
clicks shut.
CAUTION !!
·
Never open the CF card cover or remove the CF card while the camera is on.
·
Never do any of the following while the CF Card busy light is on. (The CF card
busy light
indicates when the camera is writing, reading, or erasing images from
the CF card. Doing any of the following may cause image data to be lost or
corrupted.)
Do not open the CF card cover or remove the CF card.
Do not open the battery cover or remove the batteries.
Do not apply shocks or vibrations to the camera.
TIP
·
If the “D”-Dial is set to the OFF position while the CF Card busy light is on, the
camera will remain on until it is done processing images or accessing the CF
card.
28