Samsung SBB-DT - Manual (Page 9)

Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned
correctly.
(Available in Analog TV Mode Only)
When Fine Tune is enabled, the symbol "*" appears next to the number at the top.
Signal Strength
D.MENU → → → [Channel] → ENTER → → → → → ENTER→ [Signal Strength]
Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV)
channels have either perfect reception quality or you will not receive them at all. So, unlike analog
channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve
the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase
the signal strength. Continue to adjust the antenna until you find the best position with the strongest
signal.
(Available in DTV Mode Only)
Setup
Plug & Play
D.MENU → → → → [Setup] → ENTER → ENTER→ [Plug & Play]→ ENTER→ ENTER→
, → ENTER→ , → ENTER
You can manage the entire configuration.
Language
D.MENU → → → → [Setup] → ENTER → → [Language]