Sony PEG-N760C - Manual (Page 16)

16
Installing audio software
Installing the OpenMG Jukebox software
Install the OpenMG Jukebox software to the hard disk of your
computer.
Notes
• Be sure to install the software before placing your CLIÉ handheld in the
transfer mode on the cradle. Do not install the software while a dedicated
USB cable is connected to your computer.
• If the “Installing:” message continues to appear without advancing to the next
step for some time, click the “InstallShield Wizard” on the taskbar.
1
Exit all applications and follow the steps below on your
computer.
2
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
3
Click Install CLIÉ Utilities.
4
Click Install CLIÉ Audio Software.
5
Click OpenMG Jukebox.
The installation starts.
Follow the instructions displayed on the screen.
If you had already had OpenMG Jukebox Ver.1.x installed
After the installation is complete, click Exit to close the installation program.
Then install the plug-in file according to the instructions on page 15.
6
After the installation is complete, click Restart.
The installation ends and your computer restarts.
Notes
• Do not delete, move, or edit the installed folders using Windows Explorer or
any other application. If you do so, the OpenMG Jukebox database may
become unstable or damaged.
• Do not press the Alt key and the Tab key of your computer together during the
installation process.