Samsung CXM 2785TP - Manual (Page 73)

C HAPTER F OUR : DVD O PERATION
4.22
D V D O
P E R AT I O N
Setting up the Audio Options
• Digital output
PCM: Converts to PCM(2CH) 48kHz/16Bit audio. Select PCM when using the Analog Audio
Outputs.
Bitstream: Converts to Dolby Digital BITSTREAM - 5.1CH (if MPEG-2, 7.1CH). Select BIT-
STREAM when using the Digital Audio Output.
• DTS
On : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS
DECODER.
Off : Doesn’t output digital signal.
• Dynamic Compression
On : To select dynamic compression.
Off : To select the standard range.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby
Laboratories Inc. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
3
Press the UP/DOWN▲▼
buttons to select the
desired item, then press
the LEFT/RIGHT œ√ but-
tons.
1
Press the DVD SETUP but-
ton.
4
Press the RETURN button
to exit.
2
The SETUP MENU is dis-
played.
Press the UP/DOWN▲▼
buttons to select “Audio
Options”. Press the ENTER
button.