Samsung A502 - Manual (Page 14)

《14》
Connecting to a Power Source
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+/ -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
Using the batteries
Battery status
Battery indicator
The batteries are fully
charged
Prepare new batteries
There is no battery capacity.
Replace with new batteries.
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.
[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]