Sharp UX-P410 - Manual (Page 38)

Sending a Fax by Automatic Dialling
36
1
If you are sending a fax, load the
document.
•
If desired, press to set the
resolution and/or contrast.
2
Press once. <REDIAL> appears in the display, followed by the last
number dialled. Make sure the number that appears is the number you
wish to dial.
3
If you are sending a fax, press . Dialling and transmission
begins.
If you are making a phone call, lift the handset. Dialling begins.
RESOLUTION/
RECEPTION MODE
START/MEMORY
Redial
You can automatically redial the last number dialled. This procedure can be
used to send a fax or make a phone call.
Note: If a fax transmission is unsuccessful and DOCUMENT JAMMED
appears in the display, remove the document as explained on page 79. (This
may occur if the other fax machine doesn’t respond properly when you
attempt to send the document.)
READY TO SEND