Audio power specifications – Sony HTD-DW995 User Manual

Page 78

Advertising
background image

78

US

Dimensions (width/height/depth) (Approx.)

430 Ч 157.5 Ч 310 mm

(17 Ч 6 1/4 Ч 12 1/4 inches)
including projecting parts
and controls

Mass (Approx.)

7.8 kg (17 lb 4 oz)

Speaker section
• Front speakers (SS-MSP900)
• Center speaker (SS-CNP680)
• Surround speakers (SS-SRP900)

Front/center speakers


Full range, magnetically

shielded

Surround speakers

Full range

Speaker units

70 mm (2 7/8 inches)

cone type

Enclosure type

Close type

Rated Impedance

6 ohms

Dimension (width/height/depth) (Approx.)

155 Ч 96 Ч 101 mm

(6 1/8 Ч 3 7/8 Ч 4 inches)

Mass (Approx.)
Front/center speakers


0.7 kg (1 lb 9 oz)

Surround speakers

0.5 kg (1 lb 2 oz)

• Sub woofer (SA-WP780)

AUDIO POWER
SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, from 28 – 200 Hz; rated 120
watts, minimum RMS power, with no more
than 1% total harmonic distortion from 250
milliwatts to rated output.

Speaker system

Active subwoofer,
magnetically shielded

Speaker unit

200 mm (7 7/8 inches)

cone type

Enclosure type

Acoustically loaded bass
reflex

RMS output

200 W

Input

LINE IN (input pin jacks)

Power requirements

Power consumption

Dimensions (width/height/depth) (Approx.)

270 Ч 331 Ч 380 mm

(10 3/4 Ч 13 1/8 Ч 15
inches)

Mass (Approx.)

8.3 kg (18 lb 5 oz)

Supplied speakers

• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)

Supplied accessories

FM wire antenna (1)
AM loop antenna (1)
Monaural audio cord (1)
Speaker cords
• Long (2)
• Short (3)
Coaxial digital cord (1)
Footpads
• Speakers (20)
• Sub woofer (4)
Remote commander RM-AAP017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2 or
ECM-AC2a) (1)

Design and specifications are subject to
change without notice.

Area code

Power requirements

U

120 V AC, 60 Hz

Area code

Power consumption

U

80 W

For details on the area code of the
component you are using, see page 3.

Advertising