Sunbeam BT4400 - Manual (Page 10)

8
Position the oven on a dry, level surface,
ensuring that the ventilation slots on the side
and top of the appliance are not obstructed.
Plug the power cord into a 230-240 volt
power outlet and turn the power on.
Note: When turned on for the first time,
your Bake & Grill may give off vapours for
up to 10 minutes. This is due to the initial
heating of the materials used. It is safe, not
detrimental to the performance of the oven
and will not reoccur.
Important: Do not force open the oven door
beyond its limit or let the door drop open as
this will distort the doors ability to maintain a
proper seal.
To bake or roast
The top two and bottom two elements will
heat when the 'Bake' setting has been
selected.
1. Place the wire rack, in either the raised
or sunken position, into the desired rack
support guide.
2. Place the food to be baked on the wire
rack, using the appropriate pan, tray etc.
3. Turn the oven setting to ‘Bake’.
4. Select the desired temperature on the
temperature control.
Note: For best results, allow the oven to
preheat for 5 -10 minutes or as per recipe
instructions.
Important: If baking cakes, biscuits etc, using
recipes other than those provided with this
instruction booklet, it is recommended that
oven temperatures for the 'Bake' setting be
reduced by approximately 20-30°C. The
recipes in the back of this book have already
been adjusted.
5. To turn the oven on, turn the timer
control to the desired time. Alternatively,
for continuous operation, turn the timer
control to the ON position.
6. When finished baking, the oven will switch
off automatically and a bell will sound if
the timer was selected. Alternatively, turn
the timer control to OFF position if the
continuous mode was selected.
To grill
The top two elements will heat when the
'Grill' setting has been selected.
1. Place the wire rack, in either the raised
or sunken position, into the highest rack
support guide.
2. Place the drip tray inside the baking pan
and position the food on the drip tray.
Place the baking pan on the wire rack.
3. Turn the oven setting to ‘Grill’.
4. Set the temperature control to maximum
240ºC.
Note: For best results, allow the oven to
preheat for 5 -10 minutes or as per recipe
instructions.
5. To turn the grill on, turn the timer control
to the desired time. Alternatively, for
continuous operation, turn the timer
control to the ON position.
6. When finished grilling, the oven will switch
off automatically and a bell will sound if
the timer was selected. Alternatively, turn
the timer control to OFF position if the
continuous mode was selected.
To toast
The top two and bottom two elements will
heat when the 'Toast' setting has been
selected.
1. Place the wire rack into the middle rack
support guide, in the sunken position,
for the BT5300 and into the top rack
support guide in the raised position for the
BT4400.
2. Arrange bread on the wire rack.
3. Turn the oven setting to ‘Toast’.
Using your Bake & Grill