Sony CDX-CA690X - Manual (Page 15)

15
Storing station names
— Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name using up to 8
characters for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (MENU), then press either side of
(DISC/PRESET) repeatedly until
“NAMEEDIT” appears.
3
Press (ENTER).
4
Enter the characters.
1
Press the (+)* 1 side of (DISC/PRESET)
repeatedly to select the desired
character.
A t B t C … t 0 t 1 t 2 …
t + t – t
* … t _* 2 t A
* 1 For reverse order, press the (–) side of
(DISC/PRESET).
* 2 (blank space)
2 Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you
can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press (ENTER).
Tips
• Simply overwrite or enter “_” to correct or erase
a name.
• There is another way to start storing station
names: Press (LIST) for 2 seconds instead of
performing steps 2 and 3. You can also complete
the operation by pressing (LIST) for 2 seconds
instead of step 5.
Displaying the station name
Switch the display item to frequency or station
name*.
To Press
Switch display (DSPL) during radio
item reception
* If the station name is not stored, “NO NAME”
appears in the display for one second.
Erasing the station name
1
During radio reception, press (MENU),
then press either side of (DISC/PRESET)
repeatedly until “NAME DEL” appears.
2
Press (ENTER).
3
Press either side of (DISC/PRESET)
repeatedly to select the station whose
name you want to erase.
4
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase
other names.
5
Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO DATA” appears in step 4.