Samsung CLX-6220 - Manual (Page 130)

Supplies and accessories_ 3
skin.
When you open the front door and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer
belt.
3. Remove the new toner cartridge from its bag.
• Don't use sharp objects, such as a knife or scissors, to open the
print cartridge package. You could damage the surface of the
print cartridge.
• To prevent damage, do not expose the print cartridge to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
4. Slowly shake the cartridge five or six times to distribute the toner evenly
inside the cartridge. It will assure maximum copies per cartridge.
5. Place the print cartridge on a flat surface, as shown, and remove the
paper covering the print cartridge by removing the tape.
• If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
• Do not touch the surface, the OPC drum in the cartridge. If the
surface is contaminated, it might affect the printout quality. Use
the handle on the cartridge to avoid touching this area.
6. Hold the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine. Ensure the color cartridge is placed in the
correct position, see label in picture below for the correct color position
for each cartridge.
Tabs on the sides of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position until it locks into
place completely.
7. Close the front door. Make sure that the cover is securely closed.
If the front door is not completely closed, the machine will not
operate.
Replacing the paper transfer belt
After the life span of the paper transfer belt is complete, you have to replace
it.
• The transfer belt-related message appears on the display, telling it's
time for a replacement.
• The Smart Panel program window appears on the computer telling you
the paper transfer belt needs to be replaced.
The life span of the paper transfer belt may be affected by operating
environment, printing interval, media type, and media size.
1. Open the front door.
If you leave the front door open for more than a few minutes, the
OPC drum in the toner cartridge can be exposed to light. This will
cause damage to the OPC drum. Close the front door should the
installation need to be halted for any reason.
2. Press the green release handle to release the paper transfer belt.
Holding the handle on the paper transfer belt, lift it out of the machine.
3. Remove a new paper transfer belt from its bag.
4. Remove the paper covering the paper transfer belt.
• Do not use sharp objects, such as a knife or scissors, to open the
paper transfer belt package. You could damage the surface of