Samsung CLX-6220 - Manual (Page 49)

Media and tray_ 7
machine’s fusing temperature for 0.1 second. Check your machine’s
specification to view the fusing temperature about 170°C(338 °F).
• Used paper ink must be non-flammable and should not adversely affect
machine rollers.
• Before you load used paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off used paper, reducing
print quality.
Photo
• Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
Glossy photo
Load one paper to the multi-purpose tray at a time, glossy side facing
down.
• Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
• Recommended media: Glossy paper (A4) for this machine by HP
Superior Paper 160 glossy (Product: Q6616A).
Matte photo
Load one paper to the multi-purpose tray at a time, side to be printed
facing down.
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and fax modes. For
computer printing, select the paper size and type in the application program
you use on your computer (See "Opening printing preferences" on page 2).
The settings made from the machine driver override the settings on
the control panel.
Setting the paper size
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Size and press OK.
5. Press the up/down arrow to select the paper tray you want and press
OK.
6. Press the up/down arrow to select the paper size you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.
If you want to use special-sized paper-such as a billing paper, select
Custom in the Paper tab in the Printing Preferences (See "Opening
printing preferences" on page 2).
Setting the paper type
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Type and press OK.
5. Press the up/down arrow to select the paper tray you want and press
OK.
6. Press the up/down arrow to select the paper type you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.
Setting the paper source
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Source and press OK.
5. Press the up/down arrow to highlight Copy Tray or Fax Tray and press
OK.
6. Press the up/down arrow to select the paper tray you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.
If you want to use special-sized paper-such as a billing paper, select
Edit.. in the Paper tab in the Printing Preferences (See "Opening
printing preferences" on page 2).
Selecting an output location
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output tray, and the output support will help
the printed pages to align. For the output support to correctly align the
pages, you need to pull it out appropriately depending on the paper size.
1 Output support
2 Extension
• If paper coming out of the output try has problems, such as excessive
curl, try printing to the rear door.
• If the output support is incorrectly adjusted, printed pages may be
mis-aligned or fall.