Sanyo TRC-540M - Manual (Page 10)

n / q ST OP/EJECT
b PLA
Y
m REC
OPR/BA
TT
9
PLAYBACK (Fig. 8)
Fig. 8
1. Load the microcassette as shown in Fig. 5.
2. Set the SPEED switch to 2.4 or 1.2 to correspond with
the recorded tape speed.
3. Press the PLAY button and adjust the –VOL+ control.
4. Press the STOP/EJECT button to stop playback.
Cue and reviewing
While playback, slide the FFW/CUE | REW/REV switch down
or up and hold it. Release the button when the desired point
is reached. Playback continues.
TRC-540M/US 9/10/03, 10:37 AM 10