Sanyo PJLINK PLC-WM4500 - Manual (Page 32)


P Note:
You can choose the pattern of Pointer (Dot/Arrow/Finger) in the
Setting Menu (p.60)
You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.
Press the POINTER button to activate the Pointer function.
1


MOUSE POINTER button
POINTER button
To cancel the Pointer function, press the POINTER button
again or press any other button.
Use the MOUSE POINTER button to move the Pointer.
The remote control can be used as a wireless mouse for your computer.
Move the pointer on the
screen with this button.
MOUSE POINTER
button
R-CLICK button
L-CLICK button
Acts as right (click)
mouse button while the
projector and a computer
are connected with a USB
cable.
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
Before operating the wireless mouse, connect your computer
and the projector with a USB cable (p.19).
When the Pointer function is used, the wireless mouse is not
available.
When a USB cable is connected to the computer and the
projector, turn on the projector first, then the computer. If you
turn on the computer first, the wireless mouse function may
not operate properly.
1

Basic Operation
Pointer Function
Wireless Mouse Operation
Dot Arrow Finger