Operating instructions, Use and care cautions for glass bowls, Mixing guide – Sunbeam 12-Speed Electronic MIXMASTER User Manual

Page 5

Advertising
background image

Operating Instructions

1. The SPEED CONTROL is used to start, stop, and control the speeds of

your Sunbeam Mixmaster Mixer. Clearly marked instructions for

correct mixing speeds for each type of mixture are shown in the

mixing guide, page 5. The Speed Control should be in the OFF

position before tilting the mixer head.

2. The LOCK DOWN BUTTON is located on the underside of the mixer

head. When mixing batters and kneading bread dough make sure

the mixer head is locked down. To tilt mixer head back, simply

press in on the button.

3. The TURNTABLE. The rotating turntable fits into the socket on the

base of the stand. Make sure turntable is properly in place before

using mixer. The turntable is fitted with ball bearings which provide

an easy turning action of the bowl while mixing. THE TURNTABLE ASSEMBLY SHOULD NOT BE IMMERSED

IN WATER.

4. EJECTING BEATERS & DOUGH HOOKS. TURN THE SPEED CONTROL TO OFF. UNPLUG THE MIXER CORD.

Raise the mixer head. The beaters or dough hooks may then be removed. NOTE: DO NOT KNOCK BEATERS

AGAINST THE BOWL ON COMPLETION OF MIXING.

Use and Care Cautions For Glass Bowls

Failure to follow these instructions can cause breakage.

1. Do not use on top of stove.

2. Do not use in toaster oven.
3. Do not use with hot foods and liquids.
4. Do not handle bowl with a wet cloth or place on a wet or cold surface.
5. Do not use chipped or cracked bowls.
6. Do not use scouring pads or any object that will scratch the bowls.

7. Do not use in oven, under broiler or in a microwave oven.

Mixing Guide

About the Speed Control

The Speed Control dial is used for turning the mixer ON and OFF and for selecting its 12 mixing

speeds. Rotate the Speed Control dial in a clockwise direction to increase mixing speed, and in a

counterclockwise direction to decrease mixing speed. As you rotate the Speed Control dial, notice that

a numbered speed is aligned with the indicator on top of the mixer head. This numbered speed

indicates the speed at which the mixer is operating. Rotate the Speed Control dial until the indicator is

opposite the numbered speed you wish to use.

About the mixing guide

The mixing guide has been designed to help you take the guess work out of preparing foods.

Use the

descriptions as a mixing guide when preparing your favorite recipes. Following is a description of each

4

Advertising