Sony MagicGate MSGC-US10 - Manual (Page 12)

12-GB
Step 2 : Installing the OpenMG Jukebox software
(continued)
3
Click to select [Install OpenMG Jukebox Ver.2.0 and Driver] or
[Install Driver only].
•If installing OpenMG Jukebox for the first time, select [Install
OpenMG Jukebox Ver.2.0 and Driver].
•If an older version of OpenMG Jukebox is installed, select [Install
OpenMG Jukebox Ver.2.0 and Driver] (see page 13 ).
•If OpenMG Jukebox Ver.2.0 is already installed, select [Install Driver
only] to add only the driver for a new external device/media.
4
Click to select [MSGC-US10].
5
Click [Install], then follow the displayed instructions.
If OpenMG Jukebox icon is already displayed on the Task
tray
The setup program will not be run and the software will not be
installed. Remove it from the Task tray by right-clicking to display
[Exit], then start the setup program again.
After the installation is completed, the computer will be restarted if
required.
6
Connect the unit to your computer.
If the OpenMG Jukebox icon is set to display on the Task
tray
The first time you connect this unit to the computer after installing
OpenMG Jukebox Ver.2.0, remove OpenMG Jukebox icon from the
Task tray before connecting. From the next time, this is not necessary.
7
Start OpenMG Jukebox.
P Note
Do not delete, move, or edit the installed folders using Windows Explorer or
any other application.
Doing so could cause the OpenMG Jukebox database to become unstable or
corrupted.