To set e1000 parameters in a linux environment, To set e1000 – Sun Microsystems Gigabit Ethernet MMF/UTP Adapter User Manual
Page 117
Advertising
Appendix C
Installing the Sun PCI-Express Dual Gigabit Ethernet Device Driver on Linux Platforms
83
▼
To Set e1000 Parameters in a Linux
Environment
1. Remove the Sun PCI-Express Dual Gigabit Ethernet device driver, if it is already
loaded.
2. Load the Sun PCI-Express Dual Gigabit Ethernet device driver:
Or you can use the insmod command:
where VAL1 applies to the first e1000 interface and VAL2 to the next interface and so
on.
# rmmod e1000
# modprobe e1000
option=VAL1, VAL2, . . .
# insmod e1000
option=VAL1, VAL2, . . .
Advertising